הוספת הודעה חדשה
  • · התפוררות אבן בשפת הבריכה

    (Tzvi Szajnbrum)

    הבעיה שלי כפי שתתואר בהמשך דורשת איזה חומר מיוחד.אולי מישהו יודע איזה חומר לקנות?

    Four years ago we built a swimming pool with a vinyl bottom. The pool is located in a hot and sunny location in the Middle East. For copping we used (unfortunately) a cheap fake Hebron marble. The pool is treated with salt ( a machine that turns salt into natural chlorine) and chlorine tablets. The water is always stable but the copping stone is crumbling into the pool and there are parts of the stone that have already large holes from the crumbling. I need some kind of product that will stop the crumbling, at least for the next 2 years until we replace the vinyl bottom. Until then we cannot replace the copping around the pool. Thank you very much.

    Unfortunately, you describe a chemical reaction between the Stone and the salt/chlorine solution. This is very natural and to be expected with the involved materials. The calcium in being deteriorated be the salt. The only solution would be to remove the catalyst (salt/chlorine). On any future project granite should be used. The sloution may react with granite, but it will never deteriorate to the point that chuncks will seperate from the coping. Only a loss of sheen of the polish (slight etching), if the granite is textured then no visible signs of weawill show.

    I agree with Dan. You know we have many 100 year old, or so, marble upright memorials all across the south. Most are thin (2 to 3 inches) and now broken and on the ground. Many are still upright. The closer you get to the Gulf of Mexico the more crumbly they seem to be, almost as if they are rotten. Maybe a good exterior penetrating sealer will help them hold up better over the next couple of years until you can replace with a better selection. Some of the STT guys may have a suggestion also. http://www2.dupont.com/Stone_Tech_Professional/en_US/products/Protect/heavy_duty_exterior_sealer.html_________________

    • · התפוררות אבן

      (גבי)

      שלום צבי,

      אם היית מצרף תמונה היה אולי ניתן לעזור יותר. על כל פנים, וכפי שהציעו לך כבר באותו פורום- ניתן להספיג את האזור עם סילר שקוף , במספר שכבות. הסילר ימנע את המשך חדירת המים אל תוך האבן. יש לוודא שהאבן יבשה לגמרי לפני שמבצעים את הציפוי עם הסילר. מומלץ לעבוד עם סילר דליל כדי שיוכל להספג עמוק לתוך האבן. כמו כן ניתן לצפות את האבן עם ציפוי פוליאוריטן שקוף שעמיד בקרינת השמש, אך הסילר עדיף.

      האם מדובר בבית / בריכה בישראל או בחו"ל ?

      גבי

      • · בריכה

        (בי)

        תודה רבה על ההסבר ואכן הציעו לי לצפות עם פוליוריטן (?). הבריכה נמצאת בישראל וזו בעיה כי קרני השמש בתוספת המלחיות של הבריכה גורם לנזק עצום לאבן. אשמח לדעת מה השם המסחרי של החומר פוליוריטן כדי לקנות אותו. ממש תודה רבה

        • · בריכת שחייה

          (גבי)

          שלום צבי,

          קיים מגוון רחב של ציפויים אפוקסים (וגם מגוון רחב של מחירים...).

          ראה חומרים שונים באתר חברת סילטק ,חומר מסוג "פוליאורה"ואת אתר חברת "פולידן".

          שים לב שהחומר אמור לעמוד בקרינת השמש, בשחיקה (דריכה) ואמור להספג אל תוך האבן. לא כל החומרים מתאימים לכך והחומר המומלץ בדרך כלל ,והיקר ביותר , הוא הפוליאורה.

          בהצלחה,

          גבי

« חזרה לפורום
האתר בשיפוץ

אתר איטומן הוותיק נמצא בעיצומם של תהליכי שדרוג אשר יתרחשו במספר פעימות.

נשמח לקבל הערות והמלצות.

תודה וגלישה נעימה !

משהו לא ברור?

אנא שאל בפורום ונשמח לעזור.

הפתרון לעובש

צבע מקצועי מהפכני נגד עובש ופטריות. אינו מכיל רעלנים וידידותי לסביבה.

מוצרי זיפקס

טכנולוגיית האיטום הייחודית של זיפקס נועדה לאיטום כל משטח בטון.

דילוג לתוכן